Chemistry

Plate Washout - Plate Developer - Plate Processor Cleaner

FLEXO PLATE WASHOUT

HPS-XO & HPS-XO/W

FLEXO PLATE WASHOUT

HPS-XO is a fast-processing flexographic washout chemistry that requires minimal equipment cleaning time and operator involvement. Worker conditions and safety are greatly improved with HPS-XO due to its high flash point, low vapor pressure, and minimal odor. Because HPS-XO does not require heat during plate-processing, chemistry evaporation and VOC admittance are greatly reduced. If safety, speed, and quality are essential, HPS-XO is the solution.

  • Fast drying

  • Low to no odor

  • High flash point

  • No heat to plate processor

  • Reduced VOCs

  • Universal washout for all flexo plates

  • No balancing needed (*errors in distillation may cause imbalance)

HPS-XO Product Flyer

HPS-XO SDS (English)

HPS-XO SDS (Spanish)

HPS-XO/W SDS (English)

HPS-XO Special

FLEXO PLATE WASHOUT

Formulated ​specifically to work with Kodak NX plates, HPS-XO Special has the capability to dramatically reduce processing and washout times while retaining the features of safety and quality inherent in our standard HPS-XO washout. For exclusive Kodak NX plate makers, there is no better solution than HPS-XO Special.

  • Extremely fast drying

  • Low to no odor

  • High flash point

  • No heat to plate processor

  • Reduced VOCs

  • Exclusive to Kodak NX plates

  • No balancing needed

HPS-XO Special Product Flyer

HPS-XO Special SDS (English)

HPS-LO Washout

FLEXO PLATE WASHOUT

Developed by the recipients of the EPA's Presidential Green Chemistry Award, LO Washout is a product designed for those with safety in mind. Not only are worker conditions greatly improved with LO Washout, but the blend follows strict guidelines and state EPA requirements. LO Washout does not require heat and therefore produces little VOCs resulting in a reduction of consumption rates. LO Washout provides speed without sacrificing quality, and complies with rigid environmental standards while remaining affordable.

  • Fast drying

  • Reduced odor

  • No heat to plate processor

  • Meets stringent EPA requirements

  • Universal washout for all flexo plates

  • No balancing needed  (*errors in distillation may cause imbalance)

LO Washout Product Flyer

LO Washout SDS

FLEXO PLATE WASHOUT

HPS-CX

PLATE DEVELOPER

HPS-CX is a multi-part solvent best used to process Kodak NX plates. However, HPS-CX is a robust formula well-suited to developing any manufacturer's plates. To properly maintain HPS-CX, users will need to rebalance solvent. Each constituent part can be purchased separately to make this process as easy as possible. SDSs for each part and the finished product are included below.

HPS-CX SDS (English)

HPS-CX Part 1 SDS (English)

HPS-CX Part 2 SDS (English)

HPS-CX Part 3 SDS (English)

HPS-CX SDS (Spanish)

HPS-CX Part 1 SDS (Spanish)

HPS-CX Part 2 SDS (Spanish)

HPS-CX Part 3 SDS (Spanish)

HPS-XO/K

PLATE DEVELOPER

HPS-XO/K is a slightly boosted version of our standard HPS-XO formula best suited to process a mix of flexographic plates including Kodak NX series. Like HPS-XO, HPS-XO/K has a high flash point, low vapor, and produces minimal odor. Because HPS-XO/K does not require heat during plate-processing, chemistry evaporation and VOC admittance are greatly reduced compared to other mainstream solvents.

  • Fast drying

  • Low to no odor

  • High flash point

  • No heat to plate processor

  • Reduced VOCs

  • Universal washout for all flexo plates

  • No balancing needed (*errors in distillation may cause imbalance)

HPS-XO/K SDS (English)

HPS-LO/N

PLATE DEVELOPER

Designed with Kodak NX users in mind, HPS-LO/N is an extremely fast-processing solution. Its high flash point, subtle aroma, and low VOCs make this premium product not only one of the market's most efficient solutions for NX plates, but a safe and environment-friendly one as well.

HPS-LO/N SDS (English)

HPS-LO/N Installation, Optimization, and Verification (English)

HPS-LO/N Customer Manual (English)

HPS-LO/N Recycling Service Provider Guidelines (English)

HPS-LO/N SDS (Spanish)

HPS-LO/N Installation, Optimization, and Verification (Spanish)

HPS-LO/N Customer Manual (Spanish)

HPS-LO/N Recycling Service Provider Guidelines (Spanish)

Contact Us Today
For More information

PLATE PROCESSOR CLEANER

HPS-PC

PROCESSOR CLEANER

HPS-PC is a specialty product designed to flush out plate processors. This formulation cleans and dissolves built-up photopolymer in all systems as well as digital LAMs coating. HPS-PC can be hand wiped or run through the plate processor without a plate to dissolve build-up throughout the system. If used with a finished plate, HPS-PC effectively cleans a plate processor's brushes. For ease of use and cleaning thoroughness, HPS-PC is a product unmatched.

  • For best results, empty preexisitng plate washout solution from processor and refill with HPS-PC.

  • Run as many plate cycles until desired cleaning is complete.

  • Remove HPS-PC from plate processor.

  • For excessive build-up on brushes, run HPS-PC with finished, full width plate with relief.

  • When finished, used cleaner may be returned to HPS, or retained and distilled.

HPS-PC Product Flyer

HPS-PC SDS

Click HERE for information on our

Flexographic Plate Processor Cleaning Program

Contact Us Today
For More information


HPS Technologies Global  -  2185 Hwy 292  -  Inman, SC  29349 
Phone: 864-472-6604  - Email:  customersupport@hpstec.com

 

A Division of Heliograph North America

  • White LinkedIn Icon

© 2019 by HPS Technologies Global